We design, manufacture and assembly the best greenhouses, adapted to the client’s needs.

Greenhouses

Icono medidas invernaderos

Design to measure

We study and design customized projects according to the needs of our clients.

Strapping cut

We create galvanized strip with the specific dimensions of each project.
icono invernadero

Tube manufacturing

We make our pieces with the welded strip to transform it into round tubes cut to the specific measurement.
icono-elaboracion-piezas-invernadero-sanjorge

Elaboration of components

We customize, adapt and design greenhouse elements to optimize the project according to the needs of the crop.

Equipments

The adequate characteristics of our plastics and meshes ensures the success and optimization of the greenhouse.

Final project

With the help of technicians and assemblers we finalize our projects having the satisfaction of our clients

Custom Projects

Our differentiating seal consists, in a meticulous study of the needs and specifications, to carry out integrated projects, that provide the best of solutions.

Greenhouses

We have a long experience in the manufacture of the Macro tunnel greenhouse that allows us to be leaders in its manufacture.

It is a simple technology that offers better performance and durability.

BENEFITS

01. Lower initial investment in structures.

02. Does not require a high qualification for assembly.

03. We offer the option of making our macro tunnels with oval tube, being more resistant to any inclement weather.

from 4,5 to 8,5m
from 25 to 70m
from 2 to 5m
35mm
1,5-2mm
Dx51-S350
Z-200/Z-350

SCHEMES

It is more resistant to the inclement weather. It is reinforced with struts of arch and cross of San Andres between sticks.

We use a zenith belt with support that goes from arc to arc accompanied by thermal plastic and lateral attachments.

BENEFITS

01. Lower initial investment in structures.

02. Does not require a high qualification for assembly.

03. We offer the option of making our macro tunnels with oval tube, being more resistant to any inclement weather.

from 4,5 to 8,5m
from 25 to 100m
from 2 to 5m
35-40mm
1,5-2mm
Dx51-S350
Z-200/Z-350

SCHEMES

This type of greenhouse offers up to 40% more resistance to inclement weather thanks to the oval tube used in its manufacture.

With this type of tube we manage to increase the width of the tunnel to 10 metres as well as increasing the cultivation area by 30%. By being able to fit the greenhouse machinery inside the greenhouse, we achieve significant savings in assembly and disassembly costs.

BENEFITS

01. It offers up to 40% more resistance than a conventional greenhouse.
02. 30% increase in the cultivation area.
03. Up to 10 metres wide.
04. Greater greenhouse height, favouring, in addition to aeration, the use of machinery inside the greenhouse.
05. Savings in assembly and disassembly costs thanks to the possibility of using machinery inside the greenhouse.

from 6 to 10m
from 25 to 100m
from 2 to 5m
80x40mm
1,5-2mm
Dx51-S350
Z-200/Z-350

SCHEMES

This greenhouse has an innovative design and preserve the advantages of the Reinforced Macro tunnel, allowing the performance of higher planting, which favours aeration and allows the snow to fall due to its slope. This is the best option for climates with snowfall risk.

BENEFITS

01. Lower initial investment in structures.

02. Does not require a high qualification for assembly.

03. Strong resistance to variation in weather conditions.

04. We offer the option of making our macro tunnels with oval tube, being more resistant to any inclement weather.

from 4,5 to 8,5m
from 25 to 100m
from 2 to 5m
35-40mm
1,5-2mm
Dx51-S350
Z-275/Z-350

SCHEMES

Greenhouse Top Snow

Similar to the reinforced macro tunnel but allows greater height crops.

BENEFITS

01. Lower initial investment of structures

02. Does not require a high qualification for assembly.

03. Strong resistance to variation in weather conditions.

04. Higher height, better aeration and lower harvesting cost.

05. We offer the option of making our macro tunnels with oval tube, being more resistant to any inclement weather.

from 4,5 to 8,5m
from 25 to 70m
from 2 to 5m
35-40mm
1,5-2mm
Dx51-S350
Z-200/Z-350

SCHEMES

Greenhouse Top Berries

The Top Windows Greenhouse is especially designed for hydroponic crops or higher crops. It is a structure with openings on both sides of the greenhouse, allowing the plants to be aerated.

No special qualification is required to open and close these windows, as these actions are easily performed by farm workers.

BENEFITS

01. Does not require a high qualification for assembly.

02. Strong resistance to variation in weather conditions.

03. Higher structures and more open allowing a greater airstream.

04. Reinforced structures with side window.

05. Low cost in aeration thanks to the easy handling of the side windows.

8m
from 25 to 70m
from 2 to 3m
40mm
2mm
Dx51-S350
Z-200/Z-350

SCHEMES

Invernadero Top Windows

Sanjorge has created a new greenhouse concept that is being widely accepted. The return on investment is in a short time. It is a system that allows increases in productivity in a lower cost. The PATA TORO Greenhouse is especially suitable for hydroponic crops.

BENEFITS

01. Structures are higher and more open, allowing a greater air stream.

02. Significant cost reduction (plastics, water, labour).

03. Eliminates costs of assembly and annual disassembly of the plots.

04. Improvement and increase of production for drip culture.

05. Decrease in water needs thanks to lower consumption and recovery of rainwater.

06. Dynamic structure that improves pollination.

07. Increase between 30% and 50% plants per hectare.

8m
from 25 to 70m
from 2,5m
40mm
2mm
Dx51-S350
Z-200/Z-350

SCHEMES

The Omega Greenhouse is a version of PATA TORO Greenhouse in which we have included the advantage of a corridor between tunnels that facilitates the treatment of the fruits with machinery.

Initial investment is lower than PATA TORO Greenhouse because we simplify its structure with the same advantages in dimensions.

BENEFITS

01. Higher and more open structures allowing a greater air stream.

02. Significant cost reduction (plastics, water, labour).

03. Eliminates costs of annual assembly and disassembly of the plots.

04. Improvement and increase of the yield for the drop irrigation.

05. Decrease in water needs thanks to lower consumption by recovering of the rainwater.

06. Dynamic structure that improves pollination.

07. Easy access of machines for treatment and other products.

from 5 to 7,4m
from 25 to 70m
from 2 to 4m
35-40mm
1,5-2mm
Dx51-S350
Z-200/Z-350

SCHEMES

Sanjorge offers the opportunity of a facility equipped with the highest technology and the necessary infrastructure for total climate management.

Structures designed to obtain greater volume of air in the interior with an unbeatable ventilation thanks to its automated zenithal windows.

from 5 to 10m
from 25 to 100m
from 2 to 5m
40-60mm
1,5-2mm
Dx51-S350
Z-200/Z-350

SCHEMES

Greenhouse accesories

Hydroponics

We install hydroponic systems for high-growing crops; a simple, clean, productive and innovative technique.

We make the structure to the desired size offering all the necessary elements for its cultivation: coconut fiber, pots, gutters, supports…

see examples

Doors, windows and road tunnels

Sanjorge introduces into the designs, doors and windows to improve heat maintenance and, at the same time, facilitate aeration of the greenhouse when necessary.

Thanks to these easy opening and closing systems, with a minimum investment, we improve aeration effort and thus increase the production.

see examples

Reinforcement Fittings

We can reinforce any greenhouse anticipating any variation in undesirable weather, making it safer and stronger.

We make reinforcements with different pieces according to the needs of the project:
Side Reinforcement to provide robustness to the plots. We use strut strips and stakes anchored to the ground.

Trusses to strengthen the arcs of our tunnels with strut calculated at 45º consolidate them.
Reinforcement with cross brace Struts San Andres. We strengthen the first lines of our tunnels with strut points.
Zenith reinforcement with “S” type pieces.

We have galvanized edge that facilitate the fastening of the plastic.

see examples

Accessories

We develop our projects by the way you can add any type of accessory that facilitate and increase productivity in your greenhouses.

We have the best brands to offer an integrated service.

We have plastics, meshes, ropes, pots, coconut fiber, gutters…

see examples

Fulfilled Projects

Logos Sanjorge

TERRENO Y CONSTRUCCIÓN DE NAVE INDUSTRIAL CON PUENTE GRÚA, MAQUINARÍA DE PRODUCCIÓN Y EQUIPO INFORMÁTICO.

CONSEGUIR UN TEJIDO EMPRESARIAL MÁS COMPETITIVO

Se ha recibido un incentivo de la Agencia de Innovación y Desarrollo de Andalucía IDEA de la Junta de Andalucía por un importe de 223.770,15 euros, Cofinanciados en un 80% por la Unión Europea a través del Fondo Europeo de Desarrollo Regional FEDER para la realización del proyecto. Terreno y construcción de nave industrial con puente grúa, maquinaria de producción y equipo informático con el objetivo de conseguir un tejido empresarial más competitivo.

CONSULTORÍA PARA ANÁLISIS Y MEJORA DE LA EFICIENCIA DE LOS FLUJOS DE PROCESOS.

GARANTIZAR UN MEJOR USO DE LAS TECNOLOGÍAS DE LA COMUNICACIÓN.

Se ha recibido un incentivo de la Agencia de Innovación y Desarrollo de Andalucía IDEA, de la Junta de Andalucía, por un importe de 20.000 euros cofinanciados en un 80% por la Unión Europea a través del Fondo Europeo de Desarrollo Regional, FEDER para la realización del proyecto Consultoría para análisis y mejora de la eficiencia de los flujos del proceso con el objetivo de Conseguir un tejido empresarial más competitivo.

 

TÉCNICAS SANJORGE SL en el marco del Programa ICEX Next, ha contado con el apoyo de ICEX y con la cofinanciación del fondo europeo FEDER. La fi-nalidad de este apoyo es contribuir al desarrollo internacional de la empresa y de su en-torno.